Septic Tank & Soakaway Regulations 2020

Are you prepared for the regulation change in 2020 effecting Septic Tanks & Soakaways?

There are a few options when it comes to compliance. You can install a new Septic Tank & Soakaway or sewage treatment plant system, install a soakaway or drain field, or connect to the main sewer. If your septic tank was installed before 1983 then you will need to upgrade in order to comply with the regulations.

When installing a new system, it is important to make sure that the tank or treatment plant meets all the regulations set out by the Environment Agency. This means the tank must be able to handle all of the waste water produced by your home and must have been approved for use in your area. You should always check with your local authority before buying any new equipment and ensure you are familiar with any specific regulations in your region.

Soakaways are typically used for domestic waste water and must be designed and constructed to meet the regulations set out by the Environment Agency. when you decide to install a soakaway, it is important that you use a professional installer who can ensure that it is installed correctly and safely.

If you decide to connect to the main sewer then you must obtain planning

W at  Alton Pump Services can advise and install the correct size tank necessary for compliance. They also offer regular maintenance services such as emptying of septic tanks. Contact them at 01420 561661 for more information.

 

What changes are there to Septic Tank & Soakaway Regulations 2020:

Residential & commercial property owners have a duty to ensure their sewage treatment system does not discharge waste water directly to surface water and must be discharge to the drainage field. If you have a septic tank that discharges directly to surface water you will need to upgrade or replace your sewage treatment system in accordance with the regulations.

In order to ensure compliance with the regulations. It is important to make sure that your existing sewage treatment system is up-to-date and meets the necessary requirements. If you are looking to upgrade or replace your system then it is imperative that you seek professional advice from a reputable installer. Your local authority can provide more information on approved suppliers and the types of systems that are suitable for your area .

 

What options do you have to comply.

• Install a new septic tank or sewage treatment plant system

Install a soakaway or drainage field: Soakaways must be designed and constructed to meet the regulations set out by the Environment Agency. They are typically used for domestic waste water and should be installed by a professional installer to ensure it is installed safely and correctly.

Connect to the main sewer: If your property has access to mains sewers then connecting to them may be an option, however this will require planning permission. You can contact your local authority for more information on this.

Conclusion: The Septic Tank & Soakaway Regulations 2020 are in place to protect public health and the environment from pollutants that can come from sewage discharge. It is important that residential and commercial property owners make sure they comply with these regulations by either installing a new septic tank or sewage treatment system, installing a soakaway or drainage field, or connecting to the main sewer. If you need help Alton Pump Services can advise and install the correct size tank necessary for compliance.

• Install a soakaway or drain field

On other sites, the soakaway must be designed and constructed to meet the regulations set out by the Environment Agency. Before installing a soakaway, it is important to check with your local authority for any specific regulations that need to be met in your area. You should also use a professional installer who can ensure that it is installed correctly and safely.

When considering your own sewage treatment system, it is important to make sure that it meets the necessary requirements set out by the Environment Agency. An efficient and effective system can not only help protect public health and the environment from pollutants but also save you money in the long run. To ensure your system complies with regulations, you should seek advice from a professional installer who can advise on the most suitable

• Connect to the main sewer

• In 2020, regulations for connecting a septic tank to the main sewer system are defined by the Environmental Protection Agency (EPA). To connect to the main sewer, a homeowner must first obtain a permit from the local county or regional health department. The homeowner must also be in compliance with all local and state laws governing septic systems.The homeowner must then contact a certified installer to determine if their existing septic system meets the requirements of the local sewer district and to obtain an installation permit. The installer must also inspect and assess the septic tank, connecting pipes, and any other components of the existing system before connecting it to the main sewer. The homeowner may need to have additional upgrades or modifications performed in order for their septic system to meet local regulations.

Rural properties may not be able to connect to the main system due to their septic tank not meeting the necessary requirements. In this case, property owners should seek advice from a specialist installer to ensure that they are able to install an effective sewage treatment system which meets all of the necessary regulations.

The proper maintenance and inspection of a septic tank is essential to ensure that it remains in compliance with the regulations set out by the Environment Agency. Septic tanks should be checked regularly for any damage or defects, including cracks or broken seals. It is important to ensure that the tank is not leaking, as this could lead to pollutants entering the environment and potentially causing environmental damage. If a homeowner

How do I know if my system complies

It is essential that you check with your installer or local authority to make sure that your current septic tank and soakaway are compliant with the new 2020 regulations. Your installer can also advise you on any necessary upgrades or modifications to ensure compliance. Additionally, if you do not have access to the main sewer system, a specialist installer can help you find an alternative sewage treatment solution which meets all of the requirements.

. Our team of qualified installers can help you determine the best system for your unique needs and provide installation services to ensure that your septic tank or soakaway meets all the latest regulations. Contact us today for more information or to get started.

In addition to installing the correct size tank or system it is advisable to set up a plan to maintain your septic tank. This involves ensuring your tank is emptied on a regular basis by a professional. Contact the Alton Pump Services Team to book your tank empty or to discuss your tank requirements: 01420 561661

 

Homeowners need also keep detailed records of their septic tank and soakaway maintenance.